posted
i have mrc 6200 only getting 15volts on track train barely runs g scale its on mode 1 any ideas
Posts: 5 | From: independence, mo, usa | Registered: Dec 2002
| IP: Logged |
posted
First I would look at the power being supplied to the pack. Do lights in the room run dim? Then check the wiring from the pack. How are the terminals? A little corrosion here and there goes a long way towards major problems. Check the voltage at the pack, in both mode I and II. This should reach 18v at the higher setting.
Jared
Posts: 61 | From: New London, CT, USA | Registered: May 2001
| IP: Logged |
Printer-friendly view of this topic
