I have heard bells ringing before, but had not paid much attention to them. I recently rode the Texas Eagle, and for the first time, I had a scanner. Often, when I heard the conductor talking with the engineer, I heard bells ringing in the background when the engineer was talking.
I would assume the bells are to warn people of the train at times when they don't want to blow the horn at them, but I really don't know.
Thank you Dean
Posted by Ocala Mike (Member # 4657) on :
There are FRA rules, individual state rules, and individual host carrier rules regarding this. Generally speaking, engines (not defined as multiple-unit motors) are often required to enter and leave station areas with bells sounding for warning purposes.
Posted by Vincent206 (Member # 15447) on :
I'm not an expert, but when trains are moving at slow speed in station areas, they are supposed to have the bell ringing. I think it's a blast on the horn when the train starts moving and then a constant ringing of the bell while in the station area.
Posted by ehbowen (Member # 4317) on :
I believe there is a statutory requirement that the locomotive bell be rung continuously for ten seconds before the locomotive or train is moved from a standing start.
Posted by Vincent206 (Member # 15447) on :
From GCOR (2005): 5.8.1 Ringing Engine Bell Ring the engine bell under any of the following conditions: • Before moving, except when making momentary stop and start switching movements. • As a warning signal anytime it is necessary. • When approaching men or equipment on or near the track. • When whistle signal (7) is required. [ this refers to public grade crossings ] • Approaching public crossings at grade with the engine in front and sounding of the whistle is prohibited, start signal at the crossing sign. If no sign, or if movement begins between sign and crossing, start signal soon enough before crossing to provide warning. Continue ringing bell until the crossing is occupied.