posted
Trying to find source for wiring and controlling HO scale WYE turn around. Any ideas????
Posts: 2 | From: Arcadia, CA USA | Registered: Jan 2001
| IP: Logged |
A good source for all such wiring questions is "Basic Wiring for Model Railroads" printed by Kalmbach Publishing. You can find them on the web at http://www.kalmbach.com Generally you need insulated gaps between each arm of the Y to avoid a short. Thus, if using block control, each arm becomes its own block. This is also good because if you have more than one train in the Y, there is no chance of running one into the other. Good Luck and Happy Modeling!! John
------------------ The Santa Fe and Southwestern, Chief of the Southwest!
posted
He is correct. I currently use DPDT switches for my block control. Atlas I think makes good quality plastic connectors for the track, and when painted they will bend into the rail well.
I always suggest DPDT switches. Once you learn how to wire them, they are a simple, cost effective way of controlling your trains.
Posts: 62 | From: HC, IN, USA | Registered: Jan 2001
| IP: Logged |
posted
[QUOTE]Originally posted by Throttle_JCKY: [B]He is correct. I currently use DPDT switches for my block control.
Thanks, I also use these but can't figure the best combo to assure easy operation and block protection. I am attempting to set one switch position and change all turnouts at once. Ideas?
Posts: 2 | From: Arcadia, CA USA | Registered: Jan 2001
| IP: Logged |
posted
Atlas sells a DPTD SPECIFICALLY for Y turnouts. Check the Atlas website at: http://www.atlasrr.com I think these are the best for non-DCC controlled railroads. Happy Modeling! John
------------------ The Santa Fe and Southwestern, Chief of the Southwest!
Printer-friendly view of this topic
