I just got an air whistle tinder off of ebay. New, in the box. It has a "Whistle activation button". When the transformer is wired through the button the whistle blows when the button is turned on. My whistle button on the transformer won't blow the whistle. Just the whistle button that came with the tinder. Is there any way to set up the wiring so that the transformer whistle button will work it, and not have to use the separate activation switch? Thanks!
Posted by Cthetrains (Member # 2148) on :
check the power terminals on the supply pack, is there a set labeled "whistle"?..if not, send me the specs on the supply, and I'll definitely find you a way to do it
Posted by Lloyd OBrien (Member # 2134) on :
Thanks "CTHETRAINS" (Neat name) ---I'm using a Lionel ZW 250 watt Transformer. As you most likely know, it has the whistle "buttons" or "switches". Terminals are just labeled A, B, C, D. Set up to run four trains. Thanks!
[This message has been edited by Lloyd OBrien (edited 12-16-2002).]
Posted by Cthetrains (Member # 2148) on :
OK, let me do some figuring and I'll get back to you in a couple days..
Posted by Cthetrains (Member # 2148) on :
The way I understand it, one of the two buttons is not working, am I correct? sorry it took so long, but I've been kinda busy. what was the last thing you received from me?
Posted by Lloyd OBrien (Member # 2134) on :
Actually it's working somewhat acceptably now. I reversed the wires to my lock on. Now if the train is running it works Ok. The whistle is turning (too slow to make the sound)all of the time though. When the train is in neutral, if I turn more than half throttle on, the whistle blows without pushing the button. But, as I say, it's workable this way. I really appreciate your efforts to help. ---Take Care!
Posted by Tom H (Member # 53) on :
If the whistle is running all the time, the DC sensitive relay on the whistle unit is out of adjustment. It may also be dirty and/or gummed up. If you have a parts supplier (I assume it is a Lionel) in the area, he can sell you a new relay. Installation is simple - 2 or 3 wires to solderis all. Tom - Former curator of Rochester NY's Historic Lionel Layouts.
Posted by Lloyd OBrien (Member # 2134) on :
Thanks so much Tom! I'll check that out. Appreciate your help!
Posted by Cthetrains (Member # 2148) on :
You're welcome, Lloyd. Just trying to help. Thank you, Tom; as I told Lloyd after I found out what he was working with, I'm not too familiar with larger scale equipment, so I never even thought about the possibility of replaceable parts on the whistle itself. Hey, Lloyd, good morning
[This message has been edited by Cthetrains (edited 01-07-2003).]