posted
I took some photos of a yellow tie on the SeaBoard passenger station in West Palm Beach Florida. I was wondering if anyone could tell me the meaning of the tie? You can see the pictures at the following link: http://communities.msn.com/FurtakNetRailFanPhotos/shoebox.msnw
Thank you for your time.
Kent Loudon Member # 902
posted
I'm just guesing, but ehre are two possibilities:
1. Location of a device to test on-board signalling or train stop systems.
2. Stopping point for fixed-length consists.
------------------ - Kent Loudon, Somerville NJ
Ed Hein Member # 890
posted
TriRail uses that line, along with Amtrak. TriRail is semiautomated, so it may have something to do with their train operation, as mentioned by Kent.
Isn't West Palm under restoration?
Ed
Furtak Member # 914
posted
Ed,
West Palm appears at this point to be "restored". As a matter of fact my father (who can remember the station when it opened) states that the Seaboard passenger station didn't look this good when it originally opened. It services Amtrack, Greyhound bus lines (moved from the WPB location to the passenger station), local bus service and Tri-Rail. I got feed back on the yellow tie from someone "local". It marks the clearance point for a switch. That is to say that anything on the track needs to be beyond the yellow tie in order for the passing train to clear. At this tie a switch divides the track into two tracks coming into the station. The concern is for a passenger train in the station on one side of the passenger platform being in the way of either the passing train or one pulling into the station.
I ride the Tri-Rail everyday. I'm not sure I understand what you mean by "semi-automated". The train is operated by a full service engineer and crew. He sits in the Engine (F-40) going one direction and then sits in the last car for operation on the return trip. Nothing is "automated" from what I can see. Correct me if I'm wrong. Is there something I maybe missing in the auotmation part.
Jason Furtak, Boynton Beach, Florida Jason@Furtak.net
Furtak Member # 914
posted
By the way thanks Ed and Kent for your response.
<>
Ed Hein Member # 890
posted
Jason,
I haven't ridden TriRail, but have observed it while waiting for Amtrak at Fort Lauderdale. I got the impression that parts of the operation were automated, but apparently not.
I do have one question: Why do they route TriRail trains ahead of Amtrak trains that are only minutes behind? We would up losing over half an hour on the Amtrak train I was on because of that.
Now that you mention it, I have seen ties painted white on CSX (I believe) at the clearance (or fouling) point.
Ed
Furtak Member # 914
posted
Good question about the Amtrak right of way. I know that I have waited for Amtrak on occasion on a siding. It seems pretty consistent in the morning that we wait for the Amtrak to pass. On occassion we've even waited for CSX as well. Believe it or not I think it has something to do with timing. The question becomes, "Where is Tri-Rail when two trains are approaching?"
I know they are building double track construction up and down the Tri-Rail line but it won't be finished for a while. Details about this construction can be found at: http://www.tri-rail.com/Information/DoubleTrack.htm
Yes, CSX does use white ties for the same purpose.
Nice talking to ya,
Jason Furtak, Boynton Beach Florida Jason.Furtak@Citrix.com
saxman Member # 958
posted
If I remeber correctly, on CSX, a white painted tie was where a culvert was located and the yellow tie was where the train was supposed to stop for an absolute signal.
posted